Ultraderm ultrafiltration, down to 0.01 micron
Inside every Nakawati is a hollow-fibre ultrafiltration membrane with activated carbon. Water passes through pores as small as 0.01 micron, so rust, dust, sediment, bacteria, colloids and up to 99% of chlorine stay in the filter instead of landing on your face.
Will it fit my tap?
Nakawati fits taps from 19.5 to 23.5 mm, about 98% of Lebanese bathroom taps. Six adapters come in the box:
- A-type adapters for taps with an aerator threaded inside: 19.5, 22 and 23.5 mm.
- B-type adapters for round spouts: 20.5, 21 and 22.5 mm.
It won't fit pull-out, sensor, square or oval spouts. Not sure? Email us a photo of your tap before you order.
Install in one minute
- Unscrew the small mesh cap (aerator) from your tap.
- Pick the adapter that fits and screw it on.
- Screw the filter onto the adapter and turn the lever to filtered water.
Daily use
- Run filtered water for 10 seconds before use each day, and 60 seconds if you haven't used it for 2 days.
- Use the lever to switch to normal tap water for washing dishes or hands.
- Keep water under 50°C and don't let the filter freeze.
- Clean the outside with water only, never petrol, acetone or harsh cleaners.
Specs
Flow: about 2 litres per minute
Water pressure: 1 to 4 bar
No electricity, no battery, no noise